Speaker Phat + Pi Zero case
Required Parts
| Qty. | Part | |
|---|---|---|
| 1 | × | Sheet of card approx. A4 150gsm – 250gsm. |
| 4 | × | M2.5 12mm M/F standoff |
| 12 | × | M2.5 2mm hex nut |
| 4 | × | M2.5 bolt |
The protruding thread of the standoff must be no less than 6mm.
Required Tools
- printer to print out the linked template
- craft knife for cutting-out the printed template
- small screwdriver for tightening bolts
